Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 65 / 214

Chapter 7 Configuration and Setup
7-11
Other Parameters
In the Continuous Sample Mode, the analyzer is placed in Auto Save and Auto Repeat
Mode. This means that the analyzer automatically stores the log without user
intervention and continue logging at the defined logging interval.
In Single Sample Mode, the Auto Save and Auto Report parameters are disabled. This
means that in order to save a log and then continue logging, it must be acknowledged.
The Auto Save and Auto Repeat in Single Sample Mode can be changed to the default
log options. To do this, press
5
(Other parms) from the Log Menu. Then press
1
to
enable Auto Repeat and 2 to enable Auto Save. When finished, press
ENTER
to set these
selections. The display responds "-ACCEPTED-."
┌────────────────────────────────────────┐
│╒══════ LOG SUMMARY ══════╕ │
││ Mode: Single sample │ │
││ Interval: 10 seconds │ │
││ Start: Manual │ _Auto repeat │
││ │ √ Auto save │
││ Store:_OnAlrmOnly _STEL │ │
││√ Mx √ Min √ Avg _Abs _Tmp │ -ACCEPTED- │
│└───────────────────────┘ │
└────────────────────────────────────────┘
Other Parameters Menu
Alarms
To configure the state of the alarms, press
2
(Alarms) from the Analysis Setup Menu
Page 1. The Alarm Menu is displayed (see Alarm menu, below). The current alarm
summary is displayed on the left and the menu of selections on the right. In the summary,
the alarms may be described as Off, Enabled, or Latched.
Note:
1. A Low alarm is activated by a reading above the lower of two alarm setpoints; a high
alarm is activated by a reading above the higher of the two alarm setpoints.
2. To configure the High, Low, and STEL alarm setpoints, see Alarms, below.
┌────────────────────────────────────────┐
│╒═════ ALARM SUMMARY ═════╕ ALARM MENU │
││ High alarm: Enabled │ 1=High alarm │
││ Low alarm: Enabled │ 2=Low alarm │
││ STEL alarm: Latched │ 3=STEL alarm │
││ │ ───── │
││ √ Conc Trig √ Relay 1 │ 4=Alarm trigger │
││ √ Avg Trig √ Relay 2 │ 5=Relay output │
│└───────────────────────┘ 6=Geiger countr │
└────────────────────────────────────────┘
Alarm Menu