Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 188 / 214

Appendix C Scan/Calibration Procedure
C-14
Gas 1 Gas 2 Gas 3
Wave 1 P 11 P 21 P 31
Wave 2 P 12 P 22 P 32
Wave 3 P 13 P 23 P 33
Wave 1 Q 11 Q 21 Q 31
Wave 2 Q 12 Q 22 Q 32
Wave 3 Q 13 Q 23 Q 33
15. For Multi Gas Library Application: Press "

=Prev" to get to the Matrix
Parameters screen. From the Matrix Parameters screen enter the P and Q
values. To enter the Q value for the first compound at the first wavelength,
select "1=Change", and “1=Q” Enter the Q value and select “Enter=Accept”.
To enter the P value for the first compound at the first wavelength, select
"1=Change", and “2=P” Enter the P value and select “Enter=Accept”.
16. For Multi Gas Library Application: Press “

=Next” to enter the Q value for
the first compound at the second wavelength. Select "1=Change", and “1=Q”
Enter the Q value and select “Enter=Accept”. To enter the P value for the first
compound at the second wavelength, select "1=Change", and “2=P” Enter the
P value and select “Enter=Accept”.
17. For Multi Gas Library Application: Continue with the procedures described in
steps 15 and 16 until the P and Q terms have been entered for all compounds
at all wavelengths.
18. For Both Single and Multi Gas Library Applications: For both single and
multigas library applications, press "ESC" until the analyzer prompts to save
the changes made. If the changes are correct, select "Enter=Save".
19. For Both Single and Multi Gas Library Applications: Press "ESC" until the
Main Menu appears. The specific SapphIRe instrument is now calibrated for
the compound(s) of interest.
20. For Both Single and Multi Gas Library Applications: Verify the calibration by
entering known concentrations of the target compound. To do this, insert an
injection volume that is in the middle of the concentration range and verify
that the concentration reading is within

10% of the reading obtained during
calibration.