Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 115 / 214

Chapter 11 Firmware Update
11-3
┌────────────────────────────────────────┐
│╒════════ STATUS ═════════╕ DATA TRANSFER │
││ Site: <all> │ Mode=Auto │
││ │ Baud=9600 │
││ Locations: --- │ │
││ │ │
││ │ 1=Change mode │
││ Memory: 94% free │ 2=Change baud │
│└───────────────────────┘ 3=Send/receive │
└────────────────────────────────────────┘
┌────────────────────────────────────────┐
│╒════════ STATUS ═════════╕ DATA TRANSFER │
││ Site: <all> │ Mode=Manual │
││ │ Baud=38400 │
││ Locations: --- │ │
││ │ 1=Change mode │
││ │ 2=Change baud │
││ Memory: 94% free │ 3=Send │
│└───────────────────────┘ 4=Receive │
└────────────────────────────────────────┘
Automatic and Manual Data Transfer Menus
Connect the analyzer to the computer with a serial communication cable. Verify that the
baud rate on the analyzer and that on the computer match. A baud rate of 19200 is
considered standard. In PCIP, press
F2
for file, and select the directory to store the file.
Type a file name (for example, “MYSETUP.TXT”). As it is being typed, the file name
appears at the bottom of the screen. Press
ENTER
to end the file name. If
ThermoConnect is being used, press
F5=Receive
, and then
F6=Full Setup
.
Uploading New Firmware
With the analyzer running, press the Firmware Update Switch on the analyzer with a thin
rod such as a paper clip (see Figure 3-8 for location). The Firmware Update menu is
displayed. Press the applicable number to select a language.
╔════════════════════════════════════════╗
║───────────── FIRMWARE UPDATE ────────────║
║ 1.00 ║
║ ║
║ Select language: 1=English 2=Francais ║
║ 3=Espanol 4=Deutsche ║
║ ║
║ ║
║ Enter=Continue ║
╚════════════════════════════════════════╝
Firmware Update Menu
Press
ENTER
to continue to the Firmware Main Menu.