Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 70 / 214

Chapter 7 Configuration and Setup
7-16
Menu Item Selections
1 = Zero save
Selects the zero save mode: 1 = Auto and 2 = Manual. In Auto Mode,
when a zero has been performed, a valid zero is automatically saved
and the next prompt displayed. In Manual Mode, when a zero has
been performed, there is a prompt that the zero is valid and instructed
to Save or Repeat Zero (see Chapter 5, Save Zero Display screen).
2 = Arrow keys
Data View enables viewing the data, described in Chapter 5, “To
Begin Analysis”. by using the arrow keys. Pressing 1 = Data View,
Pressing 2 = Locations. If this is chosen, the various data can still be
viewed by using the 6 and 9 keys as arrow keys.
3 = Log Warning
Automatically logs if and when an alarm or fault or both occurs. Press
1
(Off) to turn off this feature,
2
(On) to log at an alarm or a fault,
3
(On alarm only) to log at an alarm, and
4
(On fault only) to log at a
fault.
4 = Fault action
Specifies the type of notification received if a fault occurs. Press
1
(None) if only a symbol should be displayed,
2
(Beep) if an audible
signal is also desired, and
3
(Error Screen) if an error screen is desired
in addition to the symbol and beep.
5 = Alarm
action Specifies the type of notification received, provide a concentration
alarm occurs. Selections are the same as “Fault Action.”
6 = Purge flag
Enables receiving a "P" display indicator if a purge is not completed.
Press
1
(Off) to turn off this feature and
2
(Enabled) to enable it.