Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 76 / 214

Chapter 7 Configuration and Setup
7-22
User Settings
User Settings modify the parameters of the selected application that do not impact
application performance. This involves selecting the gas if it is a multi-gas application
and then configuring the gas unit, high alarm, low alarm, STEL alarm, and STEL time for
any application. A flow chart of the configuration is shown in the User Settings flow
chart, below.
Figure 7-2.
User Settings Flow Chart
Note:
These are the only parameters that may be changed in standard library
applications.
To access this function, press
2
(User settings) from the Application Setup Menu. If it is
a multi-gas application, the Select Gas Menu is displayed (see Select Gas menu, below).
If it is a single gas application, the Set Parameters Menu is displayed (see Set Parameters
menu, below). If it is a multi-gas application, when one of the gases listed in the Select
Gas Menu is selected, the display proceeds to the Set Parameters Menu.
┌────────────────────────────────────────┐
│╒════════ SUMMARY ════════╕ Select gas: │
││ │ 1=METHANE │
││ │ 2=ETHANE │
││ Applic: METHANE │ 3=BUTANE │
││ │ 4=PROPANE │
││ │ 5=HEXANE │
││ │ 6=GROUPTWA │
│└───────────────────────┘ │
└────────────────────────────────────────┘
Select Gas Menu
┌────────────────────────────────────────┐
│╒════ METHANE SUMMARY ════╕ METHANE │
││ HRL: 100.0ppm │ 1=Unit │
││ High: 100.0ppm │ ───── │
││ Low: 50.00ppm │ 2=High alarm │
││ STEL: 5.00ppm @ 15min │ 3=Low alarm │
││ TwaWt: Off │ 4=STEL alarm │
││ MolWt: 16.0 D: Off │ ───── │
│└───────── Gas1 ──────────┘ 5=STEL time │
└────────────────────────────────────────┘
Set Parameters Menu