Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 59 / 214

Chapter 7 Configuration and Setup
7-5
Menu Item
Selections
1 = Language
Selects the language of the display: 1 = English, 2 = Francais, 3 =
Espanol, and 4 = Deutsche
2 = Decimal
Selects the type of decimal point character: 1 = a period (.) and 2 = a
comma (,).
3 = Temp unit Selects the temperature unit: 1 = °C and 2 = °F.
4 = Press unit
Selects the pressure unit: 1 = mmHg, 2 = inHg, 3 = kPa, 4 = bar, 5 =
psi, and 6 = A (atmospheres)
5 = Conc unit Selects the concentration default unit: 1 = ppb/ppm/% and 2 = mg/m
3
.
6 = Vol unit Selects the liquid volume unit: 1 = ml and 2 = cc.
GAS UNIT
Pressing 3 (Gas unit) from the Setup Menu causes the Unit Gas Selection Menu to be
displayed (see Unit Gas Selection menu, below). The current application is displayed on
the left and the menu of selections on the right. Choose the gas for which the units are
specified. (If there is a single gas application, this display is omitted and the display
shown in the right side of Gas Unit menu, shown below, is displayed instead.)
Note:
Changing the gas unit from ppm to ppb does not increase the analyzer’s
sensitivity.
┌────────────────────────────────────────┐
│╒══ CURRENT APPLICATION ══╕ Select gas: │
││ METHANE: ---- ppm │ 1=METHANE │
││ ETHANE: ---- ppm │ 2=ETHANE │
││ BUTANE: ---- ppb │ 3=BUTANE │
││ PROPANE: ---- ppm │ 4=PROPANE │
││ HEXANE: ---- ppm │ 5=HEXANE │
││ GROUPTWA: ---- % │ 6=GROUPTWA │
│└───────────────────────┘ Enter=All │
└────────────────────────────────────────┘
Unit Gas Selection Menu