Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 97 / 214

8-1
Chapter 8
SITE INFO
Sites and locations are storage locations for logged data within the SapphIRe memory. A
site is the collection point for logged data - concentration, date, time, absorbance data,
and possibly locations. A location is specific identity assigned to logged data.
Note:
PCIP is a DOS program. If there is a communication problems in a Windows
environment, it may be necessary to restart the computer in DOS mode. Contact the local
MIS staff or Thermo Fisher Scientific if problems persist.
SITES
Before any data can be logged, a site must be created through the keypad of the SapphIRe
(see steps that follow) and the logging parameters must be configured. This site holds all
of the data that has been logged until a new site is created or the existing is site is erased.
When a new site is created, the current site (and logged data) is not lost, only closed. The
analyzer warns of this when a new site is created. The data may be still be accessed by
downloading to the computer through ThermoConnect, or printed through the printer
port.
Creating a New Site
1. From the main menu, select #3, Site Info, to access the Site Menu Display, shown
below.
┌────────────────────────────────────────┐
│╒════════ STATUS ═════════╕ SITE MENU │
││ Site: <all> │ 1=New site │
││ │ │
││ Locations: --- │ 2=Enter site │
││ │ information │
││ │ │
││ Memory: 94% free │ 3=Erase site │
│└───────────────────────┘ │
└────────────────────────────────────────┘
Site Menu Display
2. From the site menu - select # 1 (new site)
3. The warning "Starting a site closes the old site data" may appear. Press
ENTER
.
4. Enter the name of the site through the keypad. The site name may be up to twelve
characters long. Press
ENTER
.
5. The new site name is displayed on the left and the site menu is returned. Press
ESC
to return to the main menu.