Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 79 / 214

Chapter 7 Configuration and Setup
7-25
┌────────────────────────────┐
│╒════ METHANE SUMMARY ════╕ Select │
││ HRL: 100.0ppm │ gas STEL time: │
││ High: 100.0ppm │ │
││ Low: 50.00ppm │ 15 minutes │
││ STEL: 5.00ppm @ 15min │ │
││ TwaWt: Off │ 1=Off 2=5 min │
││ MolWt: 16.0 D: Off │ 3=10 minutes │
│└───────── Gas1 ──────────┘ 4=15 minutes │
└────────────────────────────────────────┘
STEL Time Select Menu
APPLICATION VIEW AND EDIT
Application View and Edit allows a more extensive view and edit procedure for the
currently selected application. A flow chart of the configuration is shown in the
Application View and Edit Flow Chart, below.
Note
: Fixed library applications cannot be modified.
Application Type
Primary Name
Secondary Name
Gas Number
GTWA Mode
Gas Summary
Gas Name
Gas Unit
Gas High Range Limit
Gas High Alarm Level
Gas Low Alarm Level
Gas STEL Alarm Level
Gas STEL Time Interval
Gas Molecular Weight
Gas Density
Number of Wavelengths
Wavelength Summary
Wave Position
Gas TWA Weighting
Application View and Edit
Temperature Comp
Pressure Comp
Ref Comp Summary
Ref Comp Mode
Ref Wavelength
Ref Measured Drift
Humidity Comp Sum.
Humidity Comp Mode
Humidity Wavelength
Humidity Absorbance
Pathlength
Dwell Time
Batch Sampling Mode
Meas Absorb-->Conc
Wavelength Absorbance
Matrix Parameters
Figure 7-3.
Application View and Edit Flow Chart
Caution:
Only Gas Unit, Gas High Alarm Level, Gas Low Alarm Level, Gas STEL
Alarm Level, and Gas STEL Time Interval can be changed for compounds in the
standard library.
To access this function, press
3
(Applic view and edit) from the Analysis Setup Menu
Page 4, above. The Primary Name Display, the first of many parameter displays, appears.