Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 144 / 214

Chapter 14 Custom Report Formatting
14-2
HEADER
The header appears one time per site. In the coded format, it begins with the words
REPORT-HEADER and ends with the word END. The standard entry begins:
\*00]~~~~~~~~~-\01]~~~~~~~~~~ SITE REPORT\_60~~~~~~~~~~~~~\!20~~~ \!31~
This prints out as MIRAN SapphIRe - (model number) and, after tabbing to column 60,
the date, two spaces, and the time.
The easiest way to customize the header is to type the \ and whatever title required in the
header. To place other items in the header, tab to a specific column by entering \_ and a
number (for example, \_60) or space to the column to locate the next item. To center
something in a field, enter a vertical bar | at the beginning and end of the field. To print
the current date and time, enter a code as follows:
Table 14-1.
Date and Time Codes
Format Code
DDMMMYY \!20
DDMMMYYYY \!21
MM/DD/YY \!22
MM/DD/YYYY \!23
DD/MM/YY \!24
DD/MM/YYYYY \!25
HH:MM:SS \!30
HH:MM \!31
Thus, the first line of the header might read:
\ABC Widget Company\_30Toxic Gas Monitor Report\_60\!20 \!31
This would print:
ABC Widget Company Toxic Gas Monitor Report 13MAR98 13:45
To print the designation of the site configured into the analyzer, enter SITE: \*04
If Laboratory C were tested, this would print SITE: Laboratory C
Type END on the next line when the header formatting has been finished.