Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 145 / 214

Chapter 14 Custom Report Formatting
14-3
GAS DATA
The main part of the report is the gas data section. It reports data for each location. In the
coded format, it begins with the words GAS DATA and ends with the word END. The
standard printed format is shown in Figure 14-1 and the same format as coded in Figure
14-2.
REPORT-GAS DATA-SINGLE SAMPLE LOG
~~~~
~~~~
~~~~
~~~~
~~~~ {G | \@30|~~~
|
~~~~~~~~~}
~~~~ {G | HRL: \@31~~ \#24 |~~~~~~~}
~~~~ LOCATION DATE/TIME {G | MAX MIN AVG FLAGS|~~~~~~~~}
~~~~------------ ----------------{G ------ ------ ------ ------~~~~~~~}
{H{D\#15~~~~~~~~ \#00~~~ \#10~~~~{G \#20~~ \#21~~ \#22~~ \#45\#46\#47 }
}}\
END
Figure 14-2.
Gas Data Standard Coded Format
The coding in Figure 14-2 is explained as follows:
Table 14-2.
Codes Used in Standard Format
Code Meaning
{D} Repeat for all logged data for a location.
{G} Repeat for each gas for one location.
{H}
Repeat for all logged locations that are sequential and exactly the same except for
the location and data logged.
| Center data within field with leading and trailing spaces.
~ May be ignored; for definition readability/layout only
\@30 Gas name
\@31 Gas High Range Limit
\#00 Date in format DDMMMYY
\#10 Time in format HH:MM:SS
\#15 Location
\#20 Maximum
Concentration
\#21 Minimum Concentration
\#22 Average Concentration
\#24 Concentration Unit
\#45 Fault Flag
\#46 High Alarm Flag
\#47 Low Alarm Flag