Thermo Scientific MIRAN 205B Series, Инструкция по эксплуатации

Страница: 43 / 214

Chapter 5 Analysis
5-3
┌────────────────────────────────────────┐
│╒══ CURRENT APPLICATION ══╕ │
││ │ Save this │
││ │ zero? │
││ │ │
││ METHANE: ---- ppm │ Status: Valid │
││ │ │
││ │ 1=Repeat zero │
│└───────────────────────┘ Enter=Save │
└────────────────────────────────────────┘
Save Zero Display
┌────────────────────────────────────────┐
│╒══ CURRENT APPLICATION ══╕ │
││ │ │
││ │ Install │
││ │ particulate │
││ METHANE: ---- ppm │ filter │
││ │ │
││ │ │
│└───────────────────────┘ Enter=Continue │
└────────────────────────────────────────┘
Install Particulate Filter Display
┌────────────────────────────────────────┐
│╒══ CURRENT APPLICATION ══╕ Wait for cell │
││ │ to fill with │
││ │ sample... │
││ │ │
││ METHANE: ---- ppm │ 15 seconds │
││ │ │
││ │ 1=Start Logging │
│└───────────────────────┘ Enter=SkipPurge │
└────────────────────────────────────────┘
Purge Process Display
If zero autosave is not enabled, the
display asks to save this zero.
Press “1” to repeat the zeroing
procedure or ENTER to save the
zero. The display responds
“ZERO SAVED.”
The display then prompts the user
to replace the chemical filter with
the particulate filter. When this is
done, press ENTER.
Wait fo the cell to fill with sample.
The filling progress is shown on the
display. When completed, the
display changes to the Analysis
menu. Press ENTER to shortcut this
procedure. If the fill cycle is
skipped, wait for the cell to reach
equilibrium, which takes about 10
seconds. If logging is configured,
and a site has been created,
“1=START LOGGING” is
displayed. Pressing “1” will start
logging as soon as the purge cycle
has been completed.