][3][3][3]]
#PORT1_COS_STATE=[1]
activation of CoS on port 1, the same for
other ports.
#PORT1_TOS_STATE=[1]
activation of ToS on port 1, the same for
other ports.
#PORT1_QOS_RULE=[1]
selecting priority of CoS or ToS (0 – CoS
has priority, 1 — ToS has priority), the
same for other ports.
#PORT1_COS_PRI=[0]
priority by default for port 1, the same for
other ports.
#VLAN_MVID=[1]
VID of the management VLAN
#VLAN_NUM=[1]
number of configured VLANs
#VLAN1=[[1][1][default][2][2][2]
[2][2][2][2][2][2][2]]
record with VLAN settings
#VLAN_TRUNK_STATE=[0]
VLAN Trunking (0 – disabled, 1 –
enabled)
#VLAN_PORT1_STATE=[0]
Configuring port for VLAN Trunking (0
– VLAN Trunking on the port is disabled,
1 – enabled)
#STP_STATE=[0]
SMTP protocol activation (0 – disabled, 1
— enabled)
#STP_MAGIC=[65217]
always 65217
#STP_PROTO=[2]
protocol (0 — STP, 2 – RSTP)
#STP_BRIDGE_PRIOR=[32768]
Bridge Priority
#STP_MAX_AGE=[20]
Bridge Max Age
#STP_HELLO_TIME=[2]
Bridge Hello Time
#STP_FORW_DELAY=[15]
Forward Delay Time
#STP_MIGRATE_DELAY=[3]
Migration Delay Time
#STP_TX_HCOUNT=[6]
TX Hold Count
#STP_PORT1_CFG=[[1][1][128][2000
00][10]]
record with port 1 settings, the same for
other ports.
#BPDU_FORWARD=[1]
forwarding BPDU packets with STP /
RSTP protocol disabled (0 – disabled, 1 –
enabled)
#PORT1_VCT_ADJ=[100]
coefficient of correction by cable tester
for port number 1, the same for other
ports
