5.4.2 Description of Telnet commands
The switches support the following set of Telnet commands:
1. The
config
command group:
ipif – network settings (IP address, subnet mask, gateway)
ports – ports settings (speed, duplex, PoE)
igmp_snooping – IGMP setting
stp – STP/RSTP setting
snmp – SNMP setting
syslog – Syslog setting
vlan – VLAN setting
sntp – SNTP setting
smtp – SMTP setting
comfortstart — setting the function of cameras comfort start
autorestart – configuring the function of camera hanging control
dry_cont – configuring dry contacts
user_account – setting user name / password
tftp — TFTP setting
events – events setting
802.1p — QoS setting
scheduling_mechanism — scheduling mode in QoS
dscp_mapping – setting the priority of DSCP in QoS
bandwidth_control – setting the port speed limit
description – specify the description of the device
mac_filtering – MAC address filtering
inputs – setting the inputs of the expansion board
outputs – setting the outputs of the expansion board
rs485 – setting RS485
aggregation – setting aggregated channels (for TFortis SWU)
mirroring – setting mirroring (for TFortis SWU)
teleport –configuring transmitting of inputs and events to Teleport integration
units
2. The
show
command group
switch — summary information about the device
ports — information about ports
igmp_snooping — information about IGMP Snooping operation
stp — information about STP/RSTP protocols
snmp — information about SNMP
syslog – information about SYSLOG protocol
