active, the same for other ports.
#PORT1_WDT_SPEED=[0]
The lower threshold of the speed on the
port with the speed restart function active
for port 1, the same for the other ports. In
Kbps.
#PORT_SOFTSTART_TIME=[1]
preheating time for camera housings with
comfort start function (1 – 1 hour, 2 – 2
hours)
#PORT1_SOFTSTART=[0]
comfort start function for port 1 (0 –
enabled, 1 – disabled), the same for other
ports.
#PORT1_POE=[257]
PoE control on port 1 (257 – enabled, 0 –
disabled), the same for other ports.
#SFP1_MODE=[0]
The operating mode of the SFP1 port (0-
forced, 1-auto), is the same for the SFP2
port.
#SMTP_STATE=[0]
SMTP protocol (0 – disabled, 1 —
enabled)
#SMTP_SERV_IP=[0.0.0.0]
IP address of the SMTP server
#SMTP_TO1=[]
mailing address of recipient 1
#SMTP_TO2=[]
mailing address of recipient 2
#SMTP_TO3=[]
mailing address of recipient 3
#SMTP_FROM=[]
mailing address of the sender
#SMTP_SUBJ=[TFortis PSW-2G4F]
e-mail subject
#SMTP_LOGIN=[]
login to access the mailbox
#SMTP_PASS=[]
password to access the mailbox
#SMTP_PORT=[25]
SMTP port
#SMTP_DOMAIN_NAME=[]
mail server domain name
#SNTP_STATE=[0]
SNTP protocol state
#SNTP_SETT_SERV=[0.0.0.0]
IP address of SNTP server
#SNTP_SERV_NAME=[]
Domain name of SNTP server
#SNTP_TIMEZONE=[0]
time zone, relative to UTC (from -12 to
+13)
#SNTP_PERIOD=[10]
server synchronization period (1, 10 or 60
minutes)
#SYSLOG_STATE=[0]
Syslog protocol state
