#PLC_EM_PASS=[]
Identifier (login) to connect to the energy
meter
#PLC_EM_ID=[]
Password to connect to the enegry meter
#PLC_OUT1_STATE=[0]
State of output 1 for the expansion board
(0-short, 1-open, 2-logic)
#PLC_OUT1_ACTION=[0]
Action for output 1 when the logic
condition is met (0-short, 1-open, 2-
impulse)
#PLC_OUT1_EVENT1=[0]
Event 1 for output 1 of the expansion
board
#PORT1_MACFILT=[0]
Enabling MAC address filtering on port 1
(0-Normal, 1-Secure: Mac Filtration, 2-
Secure: Port shutdown, 3-Secure:
Temporary port shutdown)
#MAC_BIND_ENRTY1_ACTIVE=[0]
Record 1 in the table of allowed MAC
addresses (1-record is active)
#MAC_BIND_ENRTY1_MAC=[0:0:0:0:0:
0]
Record 1 in the table of allowed MAC
addresses (MAC address)
#MAC_BIND_ENRTY1_PORT=[0]
Record 1 in the table of allowed MAC
addresses (Port number)
