#SYSLOG_SERV_IP=[0.0.0.0]
IP address of the Syslog server
#EVENT_LIST_LINK_T=[12]
event of changing the link in the
EventList (7 – disabled)
#EVENT_LIST_POE_T=[7]
event of changing the PoE status in the
EventList list (7 – disabled)
#EVENT_LIST_STP_T=[7]
STP events in the EventList (7 – disabled)
#EVENT_LIST_ARLINK_T=[12]
event in the EventList (7 – disabled)
#EVENT_LIST_ARPING_T=[12]
event in the EventList (7 – disabled)
#EVENT_LIST_SYSTEM_T=[7]
event in the EventList (7 – disabled)
#EVENT_LIST_UPS_T=[12]
event in the EventList (7 – disabled)
#EVENT_LIST_ACCESS_T=[12]
event in the EventList (7 – disabled)
#EVENT_LIST_MAC_T=[12]
event in the EventList (7 – disabled)
#DRY_CONT0_STATE=[1]
tamper sensor active (for PSW-2G + and
PSW-2G6F +)
#DRY_CONT1_STATE=[1]
dry contact 1 activation (0 – disabled, 1 –
enabled) – Sensor 1
#DRY_CONT1_LEVEL=[1]
alarm trip level for contact 1
(0 – by opening, 1 – by closing)
#DRY_CONT2_STATE=[1]
dry contact 2 activation (0 – disabled, 1 –
enabled)
#DRY_CONT2_LEVEL=[1]
alarm trip level for contact 2
(0 – by opening, 1 – by closing)
#PORT1_RATE_LIMIT_RX=[0]
limiting the reception speed of port 1 in
Kbps (0 – limit disabled), the same for
other ports.
#PORT1_RATE_LIMIT_TX=[0]
limiting the transmission speed of port 1
in Kbps (0 – limit disabled)
#QOS_STATE=[0]
QoS state (0 – disabled, 1 — enabled)
#QOS_POLICY=[0]
scheduling mode (0 – weighted priority, 1
– strict priority)
#QOS_COS=[[1][0][0][1][2][2][3][
3]]
matching CoS priority and service priority
#QOS_TOS=[[0][0][0][0][0][0][0][
0][1][1][1][1][1][1][1][1][1][1]
[1][1][1][1][1][1][1][1][1][1][1
][1][1][1][2][2][2][2][2][2][2][
2][2][2][2][2][2][2][2][2][2][2]
[2][2][2][2][2][2][3][3][3][3][3
matching ToS priority and service queue
