5.3.21.1 List of blocked MAC addresses
Security
→
Blocked MAC Address
When MAC address filtering is enabled, this table will show the MAC address
of all the devices attempted to access one of the protected ports of the switch but
were not listed as permitted for this port.
Figure 5.3.21.3 List of blocked MAC addresses
In order to inform the network administrators about access attempts from
unknown MAC addresses, you need to set up this event. To do so, in section
Events
→ Event List
check the box MAC Filtering
Figure 5.3.21.4 Event setup
And then configure any logging protocol (Syslog, SNMP-Trap or SMTP)
