address that is not included in the list of allowed (if MAC address filtering is
enabled)
The following events are active by default:
changing the link,
a link was lost with the
Auto Restart
function active, or the device did not
respond to the PING, or the speed on the port fell below the preset level
change in the operation of the UPS module (switching to battery power, etc.)
(only in the version with UPS module available)
events from the access control system.
When using the default configuration, you receive only the most significant
information regarding the proper functioning of the system. Less significant
messages are not shown.
Figure 5.3.10 Events list
