5.3.9 Port status
Ports → Port Status
Figure 5.3.9.1 Port status
The following port parameters are available:
1.
State
– port state: on/off/blocked (with RSTP protocol off)
2.
Link –
Link status
3.
Speed/Duplex
– Speed/Duplex
4.
Flow Control
– control of data flow (IEEE 802.3x)
5.
PoE
– Power over Ethernet.
6.
SFP
– Additional information about connected SFP modules Information from
the internal memory of the SFP module is displayed, which is security-
programmed by the manufacturer. The "Detail" button becomes active when
the module is connected.
Warning
: this information is indicated by the SFP module manufacturer.
However, since this information is optional, the manufacturer may not provide
it or provide inaccurate or incorrect information. Therefore, this information
should be seen as
additional, rather than
primary.
Figure 5.3.9.2 Information from SFP module
