5.3.25 Port Mirroring
Ports → Port Mirroring
SWU switch supports traffic mirroring from the specified ports to the target
port.
Figure 5.3.25.1 Setup mirroring form port 2 to port 1
State – enabling mirroring, by default mirroring is disabled.
Target Port — target port that receives duplicate data from the source ports.
Ports — source ports, the port supports several modes:
◦
N (Normal) — the port operated in normal mode, mirroring is disabled.
◦
R (Rx) – only received packets by this ports are duplicated to the target port
◦
T (Tx) – only sent packets by this ports are duplicated to the target port
◦
B (Both) – both, send and received packets of this port are duplicated to the
target port
