Figure 5.3.30.3 Pick a *.img file
Press the Upload button and wait until the file is copied into device internal
storage.
Figure 5.3.30.4 Wait when the file upload is finished
When the file is uploaded, press
Update
to update or
Cancel
to cancel.
Figure 5.3.30.5 Press Update
After pressing Update, the update process will start. Do not reboot the switch
or turn off the power.
Figure 5.3.30.6 Wait while firmware update process finishes
Note
: the switch also supports updating via Telnet from an external TFTP server. For
more information take a look at "Manage using Telnet" section.
5.3.31 Save and restore settings
Update/Backup → Backup/Recovery
PSW switches support saving current switch settings to a configuration file,
this file editing and restoring settings from the file.
