5.3.14.1 Example of VLAN configuration
Let's configure the virtual networks as shown in the scheme.
Figure 5.3.14.1 Network topology
Where
VLAN 1
is the management network that will be used to connect
switches SW1, SW2, SW3 to the Web-interface.
VLAN 2
and
VLAN 10
are user's VLANs
Let's start configuring from the most remote switch SW2.
Ports FE1, FE2 belong only to VLAN2 and are connected to terminal devices,
therefore these ports are untagged. The same is true for port FE3 which belongs only
to VLAN10. Port GE1 belongs to 3 VLANs: VLAN1, VLAN2, VLAN10, therefore
it is a tagged port.
Based on the above, we will select the following settings:
Figure 5.3.14.2 SW2 settings
Press the
Apply
button. Connection with the device will be lost.
Now let's configure SW3 switch.
