TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 74 / 106

6 Using the product
74
Calling up the function:
✓ Application selected.
> Choose the measurement type: [ ] , [ ] → [OK] .
Options
> [Options] → Save : The readings are saved in a record.
>
[Options]
→
Print
: The readings from a record are printed.
> [Options] → Fuels : Select fuel
> [Options] → Dilution : Select the dilution factor.
> [Options] → Measurement view : (This function is not available
during a measurement): The configure measurement view
menu is opened.
> [Options] → Folders : (This function is not available during a
measurement): - The folder Folders/Locations is opened.
> [Options] → Programs : The programs menu is opened.
> [Options] → Recalibrate : (This function is not available during
a measurement): The gas sensors are zeroed.
> [Options] → Number of lines : Change the number of
measuring values per display page.
> [Options] → Show Graphic : The readings are displayed in
form of a line graph.
>
[Options]
→
Configure Graphic
: The measurement
parameters to be represented (max. 4) can be displayed ( ) or
hidden ( ).
- Possibly: Gas zeroing (30s).
> Depressurize the pressure sensor and perform pressure
zeroing.
Performing the measurement:
1.
Start measurement: [ ] .
Undiluted CO reading
If a separate measurement of CO undiluted has not yet
been carried out, this value is calculated using the readings
of the flue gas probe and is updated continuously.
If CO undiluted has already been measured separately, the
value obtained is adopted.
- The readings are displayed.
2.
End the measurement, record readings: [ ] .