TESTO 350 Maritime V2, Инструкция по эксплуатации, Страница: 37 / 106

5 First steps
37
If testo easyEmission software is connected via a control
unit to measuring boxes, the number of measuring boxes
must not be changed. To add new measuring boxes, end
the testo easyEmission software, connect the new
measuring box and restart the testo easyEmission
software.
or
or
The individual components (e.g. Control Unit with meas. box or
meas. box with meas. box) can be connected to a bus system
using the Testo Data bus cable.
Prior to commissioning a bus system, the bus address,
bus rate, application and measuring location must be
configured separately in each analyzer box and
measurement programs which are running or active must
be deactivated in each individual analyzer box.
For this, before the components are connected to a bus system,
each component must be configured separately either with the
control unit or the notebook/PC.
Calling up the function:
[ ] → Device settings → [OK] → Data bus → [OK] .