TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 58 / 106

6 Using the product
58
2. Confirm confirmation request:
Yes
→
[OK]
- The system is restarted.
If the control unit is connected via Bluetooth to the
measuring box, when the measuring box is restarted, the
control unit should be used to search again for the
measuring box (see
Search for meas. boxes
, page 43.)
6.1.2.11. Password protection
This function is available in both the meas. box and the Control
Unit. Changes are accepted for the Control unit and for the meas.
box.
The password protection is only valid for functions identified by the
following symbol: or .
Password protection can be activated / deactivated, the password
can be changed.
To deactivate the password protection change the password to
0000 (factory setting).
Calling up the function:
>
[ ] → Instrument Settings → [OK] → Password Protection
→ [OK]
Possibly:
> Enter the currently valid password:
[Enter] → Enter password → [Next] → [OK] .
Changing the password:
1. [Edit] .
2. Enter the new password → [Next] .
3. [Edit] .
4. Enter the new password again to confirm → [Next] .
5. Save changes: [Finished] .
6.1.2.12. Analog input
(Only available via Meas. Box tab)
Power cable 0554 0007 (accessory) is required.
An analog signal is read in by an external instrument. The signal is
scaled and assigned to a physical parameter. The calculated value
is displayed.
Before the flue gas analyser is started, insert power
cable 0554 0007 at the measuring box probe input port.