TESTO 350 Maritime V2, Инструкция по эксплуатации

Страница: 72 / 106

6 Using the product
72
turbine
• Fuels: Natural gas , Coke oven gas , Town gas , Propane ,
Light oil , Diesel , G20 , G25 , G30 , Test Gas
• Available measuring programs: Flue Gas , Flue Gas + m/s ,
Flue Gas + Δ p , Flue gas after catalyst , Program for
all analyzer boxes
Engine λ >1 and engine λ <1
• Fuels: Natural gas , Coke oven gas , Town gas , Propane ,
Light oil , Diesel , Heavy oil , G20 , G25 , G30 , Test Gas
• Available measuring programs: Flue Gas , Flue Gas + m/s ,
Flue Gas + Δ p , Program for all analyzer boxes , Flue Gas
after catalyst
• Measurement program Flue gas after catalyst : Two
analyzer units are required. For this measurement type, both
analyzer units must have a fresh air valve.
If one of the two meas. boxes is equipped with a measurement
range extension (individual dilution), the test 350 will
automatically recommend this meas. box to be used for
Before
cat .
If the meas. box used for measurement
Before cat
is not
equipped with the option measurement range extension, the
device will recommend to install this option.
If the meas. box used for the measurement Before cat is
equipped with the dilution option and the CO sensor is plugged
into the dilution slot, 5x will automatically be used for dilution. I
a higher dilution factor has already been activated, this setting
will be maintained.
If the meas. box used for the measurement Before cat is
equipped with the dilution option and the CO sensor is not
plugged into the dilution slot, the device will recommend to
replug the sensor accordingly.
User-defined
• Fuels:
Natural gas
,
Coke oven gas
,
Town gas
,
Propane
,
Light oil , Diesel , Heavy oil , Briquette , Lignite , Wood Pellets ,
Coke , Bois , Wood 30%M , Bark 45%H , Bark 60%H , G20 , G25 ,
G30 , Test Gas
Calling up the function:
1.
[ ] → Applications → [OK] .
Press the function key
Options
to open configuration
menus.
2. Selecting an application: [ ] , [ ] → [OK] .