Tektronix DM 5010, Инструкция по эксплуатации

Страница: 209 / 347

Section 5— DM 5010
PERFORMANCE
CHECK
Introduction
This performance check verifies the Electrical Perfor­
mance Requirements as listed in the Specification section in
this
manual. Perform the Adjustment Procedure if the instru­
ment fails to meet these checks. For convenience, many
steps in this procedure check the performance of this instru­
ment at only one value in the specified performance range.
Any value within the specified range, within appropriate lim­
its, may be substituted. The performance check may be
done at any ambient temperature between 0° and +50°C.
Performance limits for two ambient temperature ranges are
listed for some steps. Use the data listed for the tempera­
ture at which the instrument is operating. A summary sheet
is provided at the back of this section for recording perfor­
mance check results.
Test Equipment Required
The test equipment listed in Table 5-1, or equivalent, is
recommended to perform the performance check. Specifica­
tions given for the test equipment are the minimum neces­
sary
for accurate performance verification. All test
equipment is assumed to be correctly calibrated and operat­
ing within specification.
Table 5-1
TEST EQUIPMENT LIST
Description
Minimum
Requirements
Performance
Check Step
Recommended
Equipment
TM 5000-Series Power
Module
all TEKTRONIX TM 5003, Opt. 02
Dc voltage calibrator ±200 mV: ±(0.0038% of rdng
+ 0.0025% of range)
±2V-200V: ±(0.0038% of
rdng + 0.0013% of range)
±1000 V: ±(0.005% of rdng +
0.0025% of range)
1. 2, 3
Fluke 335D Dc Voltage Standard
Ac voltage calibrator 200 mV through 200 V:
10-20 Hz: ±(0.20% of rdng +
0.08% of range)
20-100 Hz: ±(0.20% of rdng
+ 0.05% of range)
100Hz-20kHz: ±(0.05% of
rdng + 0.05% of range)
20-100 kHz: ± (0.25% of rdng +
0.12% of range)
2. 3.4
Fluke 5200A Ac Calibrator, and
Fluke 5215A Power Amplifier
700 V:
10-20 Hz:
±(0.20% of rdng +
0.22% of range)
20-100 Hz: ±(0.20% of rdng +
0.15% of range)
100Hz-15kHz: ±(0.05% of
rdng + 0.15% of range)
5-1