Tektronix DM 5010, Инструкция по эксплуатации

Страница: 16 / 347

Specification —DM 5010
Performance Check in this manual. Information given in the
Supplemental Information and Description columns of the
following tables is provided for user information only and
should not be interpreted to be Performance Check require­
ments. The information under Electrical Characteristics ap­
plies to both front-panel and rear-interface measurements,
unless otherwise noted.
NOTE
For measurements to specified accuracy, internal ad­
justments should be performed after 1000 hours of
operation or every six months if used infrequently. Re­
fer to the Adjustment Procedure in this manual.
Table 1-2
ELECTRICAL CHARACTERISTICS
Characteristics
Performance Requirements
Supplemental Information
DC VOLTS
ACCURACY for the 200 mV, 2 V,
20 V, 200 V, and 1000 V ranges:
Normal Conversion Rate
(3 readings per second)
+ 18°C to +28°C
200 mV range
± (0.015% of reading + 0.01% of full
scale)
2 V through 200 V ranges
±(0.015% of r 0.005% of full
scale)
1000 V range
±(0.020% of reading + 0.010% of full
scale)
0°C to +18°C,
+ 28°C to + 50°C
200 mV range
±(0.06% of r 0.035% of full
scale)
For the typical accuracy for a given tem­
perature in this range, add to the +18°C
to -r28°C accuracy, ±(0.002% of read­
ing + 0.001% of full scale)/0C deviation
from +28°C or +1B°C.
2 V through 200 V ranges
±(0.06% of r 0.03% of full
scale)
1000 V range
±(0.065% of r 0.035% of full
scale)
Fast Conversion Rate
(26 readings per second)
+ 18°C to +28°C
200 mV to 200 V ranges
±(0.05% of reading
+ 0.05% of full
scale)
1000 V range
±(0.05% of reading + 0.1% of full scale)
0°C to + 18°C, + 28°C to
+ 50°C
200 mV to 200 V ranges
±(0.1% of reading + 0.1% of full scale)
1000 V range
±(0.1% of reading + 0.15% of full scale)
1-2