Tektronix DM 5010, Инструкция по эксплуатации

Страница: 19 / 347

Specification — DM 5010
Table 1*2 (cont)
Characteristics
Performance Requirements Supplemental Information
AC VOLTS— TRUE RMS (cont)
ACV and ACV + DCV
(DC Component <10%
of AC Component)
+ 18°C to + 28°C
200 mV through
200 V ranges
20 Hz to 100 Hz ±(0.8% of r 0.2% of full scale)
100 Hz to 20 kHz ±(0.2% of r
0.2% of full scale)
20 kHz to 100 kHz ±(1.0% of r 0.5% of full scale)
Subject to 107 V • Hz maximum
700 V range
20 Hz to 100 Hz ±0.8% of reading
+ 0.6% of full scale)
100 Hz to 15 kHz ±(0.2% of r
0.6% of full scale)
0°C to +18°C
+ 28°C to +50°C
For the typical accuracy for a given
temperature in this range, add to the
+ 18°C to +28°C accuracy the following
tolerance, per degree deviation from
+ 18°C or +28°C.
200 mV through
200 V ranges
20 Hz to 100 Hz
±(1.25% of reading ± 0.35% of full
scale)
±(0.02% of reading + 0.005% of full
scale)/ °C.
100 Hz to 20 kHz ±(0.65% of reading
+ 0.3% of full scale)
±(0.2% of r
0.005% of full
scale)/ °C.
20 kHz to 100 kHz ±(1.45% of r 0.65% of full
scale)
±(0.02% of r 0.005% of full
scale)/ °C.
700 V range
20 Hz to 100 Hz
±(1.25% of reading + 0.95% of full
scale)
±(0.02% of reading + 0.015% of full
scale)/°C.
100 Hz to 15 kHz
±(0.65% of reading + 0.95% of full
scale)
±(0.02% of r 0.015% of full
scale)/ °C.
MAXIMUM RESOLUTION 10 µV
STEP RESPONSE TIME (To rated
accuracy)
<1.2 sec, except for LOW FREQ
RESPONSE
INPUT IMPEDANCE
2 MΩ, ±0.1% paralleled by <150 pF
MAXIMUM INPUT VOLTAGE
Front-Panel Connectors
HIGH to LOW, or
HIGH to Chassis
1 kV peak (500 Vdc maximum in ACV
mode)
LOW to Chassis, or
GUARD to Chassis
350 V peak
REV AUG 1984 1-5