
Chapter 4 Software index
4-15
F11~F15=015 Master/Auxiliary speed switch
1) F05=001
,
when one of the parameters F11~ F15 is set to 015, and multi-function input
terminal is OFF, the frequency is set by the VR on the Keypad(Master speed); When
multi-function input terminal is ON, the frequency is set by the analog signal on TM2
(Auxiliary speed AIN).
2.) F05=002
,
when one of the parameters F11~ F15 is set to 015, and multi-function input
terminal is OFF, the frequency is set by the analog signal on TM2,
(Master Auxiliary speed AIN); While multi-function input terminal is ON, the frequency
is set by the VR on the Keypad (Auxiliary speed).
F11~F15=016 (PID function Disable)
When input terminal is on, PID functions set by C30 are disabled.
When it is off it enables the PID functions.
F15=017 Analog frequency signal input (Terminal AIN)
Frequency reference can be set by 0-10Vdc or 4-20mA on terminal AIN as set by F16
and SW2.
F15=018 PID Feedback signal input (Terminal AIN)
PID feedback can be connected to AIN terminal 0-10Vdc/0~20mA or 2~10V/4-20mA as
set by F16 and SW2.
F16 AIN signal select
000: 0~10V/0~20mA
001: 2~10V/4~20mA
F16:
AIN signal select
: collocation SW2 to V/I signal select
F16=000: 0~10V/0~20mA
F16=001: 2~10V/4~20mA
Run signal
Acceleration
/deceleration
prohibit
Output
frequency
※
Note:
Acceleration/deceleration prohibit is
unavailable as Run signal is OFF.
Содержание 7300EV
Страница 14: ...Chapter 3 Environment description and installation 3 4 z EV 1P2 1P5 101 2P2 2P5 201 N4S install TM1 TM2 ...
Страница 15: ...Chapter 3 Environment description and installation 3 5 z EV 1P2 1P5 101 2P2 2P5 201 N4 install TM1 TM2 ...
Страница 86: ...Chapter 6 Peripherals 6 4 z JNFS21015 22 07 FOR EV 202 203 H1 z JNFS21016 15 07 FOR EV 202 203 H3 ...
Страница 87: ...Chapter 6 Peripherals 6 5 z JNFS20858 7 07 FOR EV 401 403 H3 ...