TECO 7300EV, Быстрый старт, Страница: 43 / 93

Chapter 4 Software index
4-10
4.3 Parameter function description
Basic function parameter list
F00 Inverter horse power code
F00 Inverter model F00 Inverter model
1P2 1P2
203
203
1P5 1P5 401 401
101
101
402
402
2P2
2P2
403
JNEV
403
2P5 2P5
201
JNEV
201
202 202
F01 Acceleration time 1 (s): 00.1 – 999
F02 Deceleration time 1 (s): 00.1 – 999
Formula for acceleration/deceleration time: Denominator is based on (factory setting is Sensor less vector
control)
a) Motor rating frequency ( Sensor less vector control). (C22=000)
b) Max output frequency ( V/f mode). (C22=001)
a)
Set frequency Set frequency
Acceleration time = F01× Deceleration time =F02 × vector
F45(rated frequency) F45(rated frequency)
b)
Set frequency Set frequency
Acceleration time =F01× Deceleration time = F02 × V/F
C17(Max output frequency) C17(Max output frequency)
F03 Motor rotating direction 000: Forward
001: Reverse
Only when F04 =000, inverter operation is controlled by keypad, such parameter is available.
F04 Run signal
000: keypad
001: External Terminal
002: Communication Control
1.) F04=000, inverter is controlled by keypad.
2.) F04=001, inverter is controlled by external terminal.
3.) F04=002, inverter is controlled by communication.
F05 Frequency signal
000: UP/Down Key on keypad
001: VR on keypad
002:TM2 input signal
003: Multi-function input terminal UP/DOWN function
004: Frequency set by communication method
(When C47=1,Remote Keypad plugs, it has the priority)
1.) F5=001, when one of parameter group F11~ F15 is set to 015 and multi-function input terminal
is OFF, the frequency is set by VR on Keypad. If the multi-function input terminal is ON, the
frequency is set by analog signal (auxiliary speed) from TM2.