6.4.5 Rotating antenna
If you are operating your digital receiver in conjunction with a
rotating antenna equipped with a DiSEqC motor (Level 1.2),
switch the
DiSEqC control
(Point 6.4.1)
on
and please
note
Point 4.2.3
and
Point 10
of the operating manual.
6.5 Special functions
This menu allows you to make the settings for CI dual
decoding, as well as for the duration for which the Infobox will
be displayed, in addition to the function required to switch
several Favourites lists on or off.
>
Press the
Menu
key to call up the
Main Menu
.
>
Use the
arrow keys up/down
to mark the line
Settings
and confirm by pressing
OK
.
>
Now use the
arrow keys up/down
to mark the line
Special functions
.
>
Confirm by pressing
OK
.
The menu
Special functions
will be displayed.
(Fig. 6-12)
>
Use the
arrow keys up/down
to mark the entry
you wish to change.
6.5.1 Several Favourites lists
>
Use the
arrow keys left/right
to switch the
function for several Favourites lists
on
resp.
off
.
If the function is set to
on
, you can configure four
Favourites lists (Main list, list B, list C and list D). You
will find the factory default programming in the main
Favourites list. When the function is switched
off
, only
the main Favourites list is active.
6.5.2 Display time Information Banner
>
Use the
numeric keys
to set the desired display
time for the Infobox. This can be varied from
1
second
to
15
seconds.
6.5.3 CI dual decoding
The CI dual decoding feature allows you to receive two
different encrypted programmes simultaneously, using only
one CI module and only a single valid Smartcard.
>
Use the
arrow keys left/right
to select the CI slot
holding the CI module for dual decoding. Select
CI1
,
CI2
or
CI1+CI2
. If you prefer automatic recognition,
select
auto
. The setting
off
indicates the CI dual
decoding feature is switched off.
Please also note Point 7.3.3.
26
(Fig. 6-12)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 26
