>
Press the
green
function key
Update
.
(Fig. 5-5).
The new software for your receiver will now be down-
loaded.
This procedure may take a few minutes.
>
If you do not wish to download the new software at
this time, press the
yellow
function key
Skip
.
>
If now new software is available at the present time,
press the
green
function key
Continue
.
You will then proceed to the programme search func-
tion.
Programme/channel search/ISIPRO
You have verious options of searching for new channels,
resp. of updating the programme list.
You can either use the ISIPRO programme list function to
download a new programme list for your receiver from the
satellite, or you can perform a programme scan/search.
>
To download a current programme list, use the
arrow
keys up/down
to mark the line
ISIPRO program-
me list update
.
(Fig. 5-6)
>
Confirm by pressing the
green
function key
Start
.
The current programme list will now be downloaded
from the satellite. Please note any messages display-
ed on screen, as well as the explanations under Point
9.5.3.
If you wish to perform a programme scan, proceed as fol-
lows:
>
Use the
arrow keys up/down
to mark the field
All
programmes
if you wish to search for both free-to-
air and encrypted programmes, or
All unencrypted
if you wish to search only for free-to-air programmes.
>
Start the scanning procedure by pressing the
green
function key, and an automatic programme scan will
be performed. All the satellites included in your anten-
na configuration will be scanned for programmes. This
procedure may take a few minutes. Please note any
messages displayed on screen.
17
(Fig. 5-5)
(Fig. 5-6)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:37 Uhr Seite 17
