For daily use
Switching on and off
>
Switch the digital receiver on by pressing the
On/Stand-by
key either on the receiver or on the
remote control.
>
Press this key again to switch the receiver off again.
>
The receiver is now in stand-by mode, the current time
will be shown in the display.
Programme selection
Using the programme up/down keys
>
Use the
Programme keys up/down
either on the
receiver or on the remote control to move up or down
by one position in the programme list.
Using the numeric keys
>
Use the
numeric keys
to enter the desired pro-
gramme number. For example
1
for programme slot 1
1
, then
4
for programme slot 14
2
, then
3
, then
4
for programme slot 234
1
, then
5
, then
6
then
7
for programme slot 1567
When entering programme numbers consisting of several
digits, you have approx. 3 seconds time after pressing a key
to complete the entry.
If you wish to enter a number consisting of only one, two or
three digits, hold down the key for the last digit a little longer
to speed up the switching procedure.
Using the programme list
>
Press the
OK
key.
>
You can now mark the desired programme using the
arrow keys up/down
.
>
Press the
OK
key to switch to the programme selec-
ted.
>
Use the
arrow keys up/down
to move the marker
around the list one line at a time.
>
Use the
arrow keys left/right
to move through the
list one page at a time.
Volume control
>
Adjust the volume of your digital receiver by using the
keys
to increase the volume resp.
Volume -
to decrease the volume.
>
Press the
Sound on/off
key to switch the sound on
or off (mute).
112
080206 2233520000100
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 112
