background image

 

 

 

08905063A 

 

  - 

INSTALLATION INSTRUCTIONS 

 

HDRXSG01 

High Definition Receiver Module 

 

DESCRIPTION 

The HDRXSG01 CAT5 receiver automatically senses and compensates for the both cable length and 
wire quality for the simplest installation in the industry. It senses cable run length in 20-feet 
increments and self-adjusts with no switches to set and no charts to consult, removing the guesswork 
from high definition video distribution over CAT5 wire. 
 
The HDRXSG01 receiver mounts in the zone up to 1000 feet from the HD44CC5 switcher, and 
installs easily in a single-gang J-box. It contains a RJ45 input for the HD video and digital audio signal 
as well as a standard IR pass through connection (requires separate wire run) and power connection. 
Outputs include component video, digital audio via S/PDIF connection and IR signal. 
  
The HDRXSG01 is to be used with either the HD44CC5 (video matrix transmitter) or HDTXSG01 
(single transmitter module). Both the HD44CC5 and HDTXSG01 are sold separately.  
 

SPECIFICATIONS 

ƒ

  Size: 1 1/2” W x 2 1/4” D x 4” H 

ƒ

  Weight: 0.38 lbs (0.17 kilos) 

ƒ

 Bandwidth 

supports 

resolutions 

of 1080p, 1080i, 720p, 480p and 480i.  

ƒ

  Includes external power supply (8VAC, 400mA, 50-60Hz) 

ƒ

  Gold plated RCA connectors 

 

 

Содержание HDRXSG01

Страница 1: ...t from the HD44CC5 switcher and installs easily in a single gang J box It contains a RJ45 input for the HD video and digital audio signal as well as a standard IR pass through connection requires separate wire run and power connection Outputs include component video digital audio via S PDIF connection and IR signal The HDRXSG01 is to be used with either the HD44CC5 video matrix transmitter or HDTX...

Страница 2: ... cable connect the HD44CC5 zone output Be sure to connect power to the HD44CC5 first Then connect power to the HDRXSG01 3 On the HD44CC5 set the correct source to zone to route the signal to the HDRXSG01 from the connected High Definition source Refer to the HD44CC5 manual on how to use RS232 and IR RC68 controls for source to zone routing 4 Installation Complete No adjustments needed ...

Страница 3: ...G01 and HDRXSG01 1 Connect the High Definition Source to the HDTXSG01 2 Using CAT5 cable connect the HDTXSG01 output to the HDRXSG01 input 3 Connect the High Definition Display to the HDRXSG01 4 Installation Complete No adjustments needed ...

Страница 4: ...full process of line length and line quality self calibration As an alternate process to this procedure the power may be cycled off for a few seconds and reapplied to accomplish the same full self calibration process If for some reason the system losses power at the receiving end HDRXSG01 the transmitting end HD44CC5 or HDTXSG01 or both ends the full self calibration process will automatically occ...

Отзывы: