10.4.1 Turning to a satellite position
To turn the antenna to the position set in the satellite list, your
digital receiver is equipped with the function
turn to sat
.
>
To open the window listing the available actions, press
the
blue
function key
Actions
.
>
Now use ther
arrow keys up/down
to mark the line
turn to sat
.
>
Confirm by pressing
OK
.
>
Press the
yellow
function key
turn to sat
to turn
the antenna to the satellite position selected.
10.5 Deleting a satellite position
To delete a satellite position from the satellite list, proceed as
follows:
>
Use the
arrow keys
to mark the field
Current
satellite list
.
>
To open the current satellite list, press the
OK
key.
>
Use the
arrow keys up/down
to select the satellite
you wish to delete.
>
Confirm by pressing
OK
.
>
Use the
arrow keys
to mark the field
Delete
satellite
.
>
To delete the satellite selected, press the
OK
key.
>
Mark the field
OK
and confirm by pressing
OK
.
10.6 Reference position
When installing the external installation, the motor must be
set to the reference position (
0°
). You can therefore use the
function “Go to reference position” to turn the motor to this
position (
0°
) at any time.
>
Press the
green
function key
Ref.pos.
to turn the
antenna automatically to the reference position.
98
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 98
