9.3 Parental control
Your receiver is equipped with a parental control function.
This means that important functions (e.g. calling up the main
menu) can be protected from unauthorised use. In addition,
recordings and channels that you have blocked can only be
accessed by entering a four-digit PIN code (unit PIN). To
adjust settings in the menu
Parental control
proceed as
follows:
>
Press the
Menu
key to call up the
Main menu
.
>
Use the
arrow keys up/down
to mark the line
Settings
.
>
Confirm by pressing
OK
.
The sub-menu
Settings
will be displayed.
>
Use the
arrow keys up/down
to mark the line
Parental control
.
>
Confirm by pressing
OK
.
The menu
Parental control
will be displayed.
(Fig.
9-11)
>
Use the
arrow keys up/down
to move the market
within the menu and to change the individual positions
as indicated.
When selecting a menu item, please also note any
messages displayed on screen.
9.3.1 PIN query mode
>
In this line, use the
arrow keys left/right
to set
the pin query mode of the parental control function to
Once
or
Never
.
If you set the pin query mode to
Once
, and have not yet
changed the PIN, you will be requested to change the PIN.
To do this, proceed as described in Point 9.3.2.
Never
If you select the setting
Never
you will never be asked for
the PIN. The parental control function is switched off.
Once
If you select the setting
Once
you will be asked to enter the
PIN when calling up the main menu or when selecting a blok-
ked channel resp. a blocked hard drive recording. To make
matters more convenient for you, you will be asked for the
PIN only once in each operating cycle.
79
(Fig. 9-11)
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 79
