tbs electronics ATP1-120, Инструкция по эксплуатации

Страница: 71 / 81

64
CHAPTER 13 – SAFETY FEATURES
1 3 . 1 – P
R O T E C T I O N A G A I N S T
O
V E R H E A T I N G
The thermostat controls include a maximum temperature cutoff switch to prevent
overheating of the paraffin chamber and Retort.
These devices do not prevent alarms, but, prevent overheating when primary control
devices fail. DO NOT use the instrument when an alarm indicating a strange
temperature increase is illuminated.
In the event of overheating, it is best to switch off the instrument and disconnect it
completely.
1 3 . 2 – P
R O T E C T I O N A G A I N S T
E
X C E S S
P
R E S S U R E
There is no danger of excess pressure mishaps. The pressure levels developed in
the retort are small and do not present any major hazard.
A light pressure can be present in the retort at the end of a process.
The lid must be opened with care to avoid the possibility of eye injury by
reagent vapors and splashing. Always wear safety glasses when
handling reagents or working to identify problems.