tbs electronics ATP1-120, Инструкция по эксплуатации

Страница: 39 / 81

32
9 . 2 . 1 – R M S S
I N G L E
M
O D E
D
E S C R I P T I O N A N D
E
X A M P L E
The RMS – Instructional Screen indicates what action to take.
As explained in previous sections, at the end of each process and after the
completion of the
WPC (when active), the Reagent Management System will activate
a screen like the one shown above. This screen provides written instructions and a
graphical representation of the ATP™, showing which reagent bottles to replace and
the specific reagent to use.
If, for some reason, it is necessary to postpone the substitution of reagents after a
process, it is possible to press the ESC key, skip this session of the
RMS and
postpone it until the end of the next process.
Please note: The process limit counters are not reset by this action. At
the end of the next process, the RMS will prompt the user to replace the
reagents that expired at the end of the previous processes plus those
whose limits have been reached after this most recent run.
If the RMS is skipped at the end of a process using the ESC key as explained above,
scheduled reagent replacement can be performed without waiting to complete
another process. By choosing to enter the
RMS menu from the Main Menu, you will
automatically be prompted to press enter to start RMS operations.