TANDBERG E5500, Инструкция по эксплуатации

Страница: 140 / 256

Operating the Equipment Locally
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder Page 3-89
ST.TM.E10033.3
Table 3.68: Output Format Options
Selected Option Description
IF (204) IF output using 204 byte packets. Used for transmission
over a satellite link.
Baseband (188) Baseband output using 188 byte packets. Used for
transmission over a telecommunications link.
IF Output Option
To access the IF Output option, press the IF Output softkey in the
Modulator Menu
. This enables the IF output to be switched on or off. Use
the + and – softkeys to scroll through the choices and then press the
Enter softkey after selecting one of them.
Setup/Modulator Edit
IF Output +
On —
Enter
Update using softkeys Quit
Table 3.69: IF Output Options
Selected Option Description
On IF output switched on.
Off IF output switched off. When the IF output is switched off,
modulation is automatically set to off and the IF power
level is set to the low setting. The original settings are not
restored when the IF output is switched back on.
IF Power Option
To access the IF Power option, press the IF Power softkey in the
Modulator Menu
. This screen enables the power level of the IF output to
be set.
Use the + and – softkeys to increment or decrement the power level, or
enter a new value using the keypad. Note that if the + and – softkeys are
used, the power level is actually changed as the value changes on the
screen (for example, keeping the + softkey pressed will result in the actual
IF power level stepping up). Press the Enter softkey to accept the new
value.
Setup/Modulator Edit
IF Power +
0.0 dBm —
Enter
Update using keypad or Quit
softkeys for immediate changes