TANDBERG E5500, Инструкция по эксплуатации, Страница: 48 / 256

Installing the Equipment
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder Page 2-19
ST.TM.E10033.3
Pin Signal Pin Signal
6 Output RXC (+) (Receive Clock) 14 Input TXC (-) (Transmit Clock)
7 Input TXC (+) (Transmit Clock) 15 Not connected
8 Signal Ground
RAS Scrambling Module (M2/EOM1/RAS)
DVB ASI 1, 2 and 3
75
Ω BNC connectors provide outputs
from the unit.
Table 2.16: DVB ASI Connector
Pin Signal
Centre Signal
Screen Ground
Frequency Agile QPSK Modulator Option (M2/EOM1/QPSK2)
IF OUT MAIN
A 75
Ω BNC connector provides the 70
MHz IF output.
Table 2.17: IF OUT MAIN Connector
Pin Signal
Centre Signal
Screen Ground
IF OUT MONITOR
A 75
Ω BNC connector provides an output
for monitoring the IF signal. This output is
always enabled.
Table 2.18: IF OUT MONITOR Connector
Pin Signal
Centre Signal
Screen Ground