Quick Reference Guide
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page G-3
ST.TM.E10033.3
3.
Press Enter to make a selection.
4.
If using a digital, monochrome,
YPrPb or test pattern source, select
Frame Rate. Using the PgUp,
PgDn and Enter softkeys, select
between
25 Hz
or
29.97 Hz
.
NOTE…
Other video controls (including Noise Reduction
and Logo Overlay) are available, see Instruction
Manual for details. (VBI and Teletext are
available from the VBI option in the Setup/Video
Menu.)
G.4.2
Input Monitor
To check that the video inputs are
present, a subsampled version of the
video input to the encoder is available
on the input monitor. From the
summary screen press Adv, Input
Monitor.
G.4.3
Video Encoder
Setup
1.
From the summary screen press
Menu, Setup, Video,
Video Encoder, Profile/Level.
2.
Use the PgUp and PgDn softkeys
to select from:
MP@ML
;
422P@ML
.
NOTE…
422P@ML
is only available on this model if
purchased as an upgrade.
3.
Press Enter to make a selection.
4.
From the Video Encoder screen
press:
a)
Control Mode – select desired
mode, typically Manual.
b)
Encoding Mode – select
desired mode, typically.
Standard
c)
Encoding – select encoding On.
d)
Bit-rate – select the desired bit-
rate.
NOTE…
Similar menus exist for: Horizontal Res, Aspect
Ratio, GOP Structure and GOP Length.
G.4.4
Audio Setup
1.
From the summary screen press
Menu, Setup, Audio,
Channel 1A, Coding Standard.
2.
Use the PgUp and PgDn softkeys
to select from:
MPEG Layer 2
;
Dolby AC3
;
Pre-encoded AC3
.
NOTE…
Although
Dolby AC3
and
Pre-encoded
AC3
are selectable,
MPEG Layer 2
is
typically used in this configuration.
3.
Press Enter to make a selection.
4.
From the Channel 1A screen
press:
a)
Source – select the desired
audio source (options available
depend on selected coding
standard; embedded inputs are
via SDI).
NOTE…
As with the video source setup, the input monitor
can be used to check that the audio inputs are
present. These are displayed as an audio
bargraph. From the summary screen press Adv,
Input Monitor.
b)
Audio Bit-rate – select the
desired bit-rate.
c)
Coding Mode – select the
desired coding mode (options
available depend on selected
coding standard).
5.
Channel 1B is set up in the same
manner.
NOTE…
Other audio controls are available, see the
Instruction Manual for details.
G.4.5
Data Setup
1.
From the summary screen press
Menu, Setup, Data.
2.
Now use the PgUp and PgDn
softkeys to select from:
RS232
(Async)
;
RS422 (Sync)
.
3.
From the RS232 or RS422 screen
press:
Содержание E5500
