TANDBERG E5500, Инструкция по эксплуатации

Страница: 155 / 256

Operating the Equipment Locally
Page 3-104 Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
On Air Option
This option determines whether the output of the Multiplexer is active. To
change the On Air option, press the On Air softkey in the
Host Menu
.
Use the + and – softkeys to alternate between On and Off and then press
the Enter softkey after selecting one of them.
Setup/Mux/Host Edit
On Air +
On —
Enter
Update using softkeys Quit
Table 3.86: On Air Options
Selected Option Description
On Multiplexer output is switched on.
Off Multiplexer output is switched off.
O/P Rate (188) and O/P Rate (204) Option
To change either of the output bit-rates, press the O/P Rate (188) or the
O/P Rate (204) softkey in the
Host Menu
.
NOTE…
It would be inappropriate to use the ‘O/P Rate (188)’ setting in this configuration, even though it
appears on the menu. Information and references to O/P Rate (188) have therefore been excluded
from this section.
The O/P Rate (204) can be in the range of 0 Mbit/s to 60.0000 Mbit/s.
Use the keypad or the + and – softkeys to select O/P Rate (204) and then
press the Enter softkey after selecting it.
Setup/Mux/Host Edit
Output Bit-rate (204) +
40.000 Mbit/s —
Enter
Update using keypad or softkeys Quit
Table 3.87: O/P Rate (204) Option
Selected Option Description
204
Min:
0.000 Mbit/s
Max: 45.500 Mbit/s
Step Size: 0.0001 Mbit/s
Multiplexer output bit-rate, in 204 byte packets.
Changing the bit-rate affects the automatic video bit-rate and video
resolution calculations.