TANDBERG E5500 Скачать руководство пользователя страница 239

Страница: 239 / 256

Creating and Downloading a Logo

Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder

Page F-5

ST.TM.E10033.3

F.3.3

Downsampling

Click the Downsample toolbar button. A dialog box appears asking for a

downsampling ratio. This can be specified directly, or by entering the

desired image size. Click OK to downsample the image. The downsampling

algorithm includes a filter, so the boundary between the active and inactive

areas softens slightly. Zoom in and check that the correct areas are

transparent, and make corrections if necessary.

F.3.4

Saving the .osd File

Select File/Save As/OSD file from the menu. Saving is possible at any

time, and it is advisable to save the image often while editing is in

progress. The file may also be saved in .bmp format, but this file will not

contain transparency information.

F.4

What is OSD Loader

The OSD Loader is an application for transferring On Screen Display files to

the MCE, and causing the images in these files to be overlaid on the input

to the MCE. This enables logos to be superimposed on the encoded

bit-stream without an additional preprocessor.
The application runs under Windows 95 or Windows NT on an ordinary PC.

A network connection is required. The target MCE's IP address must be

‘visible’ from the host PC.
The application uses the .osd file format for images. These can be derived

from Windows .bmp files using the OSD Creator application (see F.2,

Creating a Logo Using OSD Creator).

F.5

Using the OSD Loader

F.5.1

Start-up

Activate the application. The application attempt to connect to the last

known MCE address. If the address is not correct, click the Abort

Transfer button and enter the IP address of the target MCE. This can be

found on the MCE front panel by selecting

Menu/Status/System/General. To test the connection, click the

Remove All button (you will be prompted for confirmation). The

communications box (at the top of the screen) should read ‘Transfer

Completed OK’. Select 625 Lines or 525 Lines depending on the current

line standard.

F.5.2

Download an .osd File

Choose an On-screen Display file with the Choose File button. You will be

prompted for a file with an .osd extension. The image will be displayed in

the OSD File box.

Содержание E5500

































































































































































































































































Результаты поиска

Содержание E5500

Отзывы:

TANDBERG E5500, Инструкция по эксплуатации, Страница: 239 / 256

Результаты поиска

Содержание E5500

Отзывы: