TANDBERG E5500 Скачать руководство пользователя страница 21

Страница: 21 / 256

Introduction

Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder

Page 1-13

ST.TM.E10033.3

NOTE…
The following three processing modes are only available if the 4:2:2 upgrade is purchased.

VBI in Picture
By selecting the extended active picture format available in the MPEG

4:2:2 specification the MCE compresses and transmits the VBI data as part

of the active picture. This mode requires up to 3 Mbit/s of extra bit-rate,

depending on the amount and complexity of the VBI present.

NOTE…
VBI in Picture transmits the VBI waveform as part of the picture and as such will be subject to some

distortion. Most analogue VBI types are robust against this type of distortion but others, e.g. video

index, are intended for SDI transmission and will not survive MPEG coding/decoding in VBI in Picture

mode.

VBI in PID
The MCE has the ability to extract and transmit a wide variety of VBI line

formats. Field Programmable Gate Array (FPGA) circuitry on the front end

of the equipment incorporates a number of general purpose line grabbers

so that known formats of VBI data can be extracted. Closed caption data

together with other formats of VBI data such as VITC and VPS are to be

transmitted in the user data field of the video.
The following VBI data formats are supported:

•

Line 21 data Services EIA-608 (Closed Caption and V-chip)

•

Neilson AMOL 11

•

VITC (EBU and SMPTE)

•

Programme Delivery and Control PDC, via ITU-R system B Teletext

extension data packets of type 8/30, format 2 and Line 16 Video

Programming System (VPS). Video Programming Teletext (VPT) and

VPS are trade names

•

Wide Screen Signalling (WSS) EN 300 294

•

Test Signals UK-ITS, ITU-R, FCC ITS (inserted at the receiver)

•

Video Index (for Pan Scan and Aspect Ratio).

Teletext Extraction
The Encoder supports internal Teletext data extraction (Teletext drop)

from the VBI of a video input and formats this data into a transport

packet, as specified in the DVB specification.
The MCE can extract up to 18 lines of Teletext from each field of the video

frame. The supported VBI line number range is 10-22 and 273-285 for 525

lines and 7-24 and 319-336 for 625 lines. Line filters can be invoked to

selectively disable any individual lines in this range. These are provided to

allow the user to ensure that non-Teletext lines (e.g. ITS lines) are not

erroneously extracted. The extracted Teletext lines are formatted into PES

packets according to the DVB specification. The Teletext PES packets are

time-stamped to allow correct alignment of subtitling captions with

decoded video.

Содержание E5500

































































































































































































































































Результаты поиска

Содержание E5500

Отзывы:

TANDBERG E5500, Инструкция по эксплуатации, Страница: 21 / 256

Результаты поиска

Содержание E5500

Отзывы: