TANDBERG E5500, Инструкция по эксплуатации

Страница: 12 / 256

Introduction
Page 1-4 Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
If option slot 4 is not occupied by an option module, it must have a
blanking module fitted to maintain correct internal air-flow (see Table 1.7).
The marketing product number and model number of the basic unit is
shown in Table 1.1.
Table 1.1: Equipment Model Description
Model
Name Model
Number Marketing
Number Description
Encoder E5500 E10033
M2/ENC/E5500
MPEG-2 Encoder with 4:2:0 video encoding mode (4:2:2 is available
as a purchasable upgrade), analogue video, SDI and data inputs.
QPSK modulation.
Information Label
There are two information labels which identify the configuration of the
unit. Figure 1.2 and Figure 1.3 are typical examples.
Figure 1.2: Information Label
Figure 1.3: Information Label 2
Option Slot Number n/a 1 2 3 4 For reference – not shown on label (see Figure 1.7).
Hardware Configuration
10033 -1 -3 -2 -49 Each piece of hardware has a unique number (see Table 1.7).
Build Standard 01 -01 -01 -01 -01
Refers to a Blank Module in option slot 4.
Refers to a QPSK Module in option slot 3.
Refers to a Non DVB Data IP Module (sometimes known as
an RS-422 Data Input Module) in option slot 2.
Refers to a Video Input Module in option slot 1.
Refers to the basic enclosure with one Motherboard (Base
Board 3ASI) and one Video Compression Module fitted.
Figure 1.4: Correlation Between Hardware and Build Standard Numbers
NOTE…
Refer to Table 1.7 and Figure 1.8 for the position of the module slots.
EVOLUTION 5000 ENCODER
Serial No. 41
10033 – 49 Bld rev 1_0_3
M2/ENC/E5500
Serial Number
A unique number for unit identification
Build Revision
A reference which identifies the build
revision of the equipment
Hardware Configuration
A reference which identifies each
piece of hardware in the equipment Marketing Number
A code which identifies the product
for marketing purposes
ENCODER
Serial No. NNNN
10033 – 49
Bld rev 1_0_3
M2/ENC/E5500
Serial Number
A unique number for unit identification
Bar Code
Used for unit identification in the
manufacturing process
Marketing Number
A code which identifies the product
for marketing purposes
Product Name
A name which identifies the type
of product