TANDBERG E5500, Инструкция по эксплуатации, Страница: 109 / 256

Operating the Equipment Locally
Page 3-58 Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
Table 3.34: Encoding Mode Options
Selected Option Description
Seamless 1
Seamless 2
Seamless 3
This gives a fixed delay which allows
the bit-rate to be changed without a
break in transmission.
Mega Low Dly
Very Low Dly
Low Delay
Standard
The delay is a function of the bit-rate
selected. If the bit-rate is changed
there is a break in transmission.
Table 3.35: Seamless Mode Bit-rate
Profile Seamless 1
(Mbit/s)
Seamless 2
(Mbit/s)
Seamless 3
(Mbit/s)
4:2:0 0.8 - 10 1.5 - 10 2 - 15
4:2:2 1.5 - 13 3 - 27 5 - 33
Rate Buffer
delay (seconds) 2.5 1.2 1
Encoding Option
To access the Encoding option, press the Encoding softkey in the
Video
Encoder Menu
. This enables encoding to be turned on or off. Use the + and
– softkeys to alternate between On and Off and then press the Enter
softkey after selecting one of them.
Setup/Video/Encoder Edit
Video Encoding +
On —
Enter
Update using softkeys Quit
Bit-rate Option
To access the Bit-rate option, press the Bit-rate softkey in the
Video
Encoder Menu
. Use the keypad or the + and – softkeys to increment or
decrement the bit-rate, and then press the Enter softkey to accept the
new value. Alternatively, enter the bit-rate directly from the keypad and
then press Enter. An error message is shown with the correct range of
bit-rates if the wrong rate is entered.
Setup/Video/Encoder Edit
Video Bit-rate +
10.000 Mbit/s —
Enter
Update using keypad or softkeys Quit