manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 97 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 97

System Configuration

4-5

4.

Use the 

Restart 

access point field to restart the AP (if necessary).

5.

Click 

Apply 

to save any changes to the System Settings screen. Navigating away from the 

screen without clicking the Apply button results in all changes to the screen being lost.

6.

Click 

Undo Changes 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the System Settings screen to the last saved configuration.

Restore Default 
Configuration

Select the 

Restore Default Configuration

 button to reset the 

AP’s configuration to factory default settings. If selected, a 
message displays warning the user the current configuration will 
be lost if the default configuration is restored. Before using this 
feature, Symbol recommends using the 

Config Import/Export

 

screen to export the current configuration for safekeeping, see 

Importing/Exporting Configurations on page 4-41

. 

Restore Partial 
Default Configuration

Select the 

Restore Partial Default Configuration

 button to 

restore a default configuration with the exception of the current 
LAN, WAN, SNMP settings and IP address used to launch the 
browser. If selected, a message displays warning the user all 
current configuration settings will be lost with the exception of 
WAN and SNMP settings. Before using this feature, Symbol 
recommends using the 

Config Import/Export

 screen to export the 

current configuration for safekeeping, see 

Importing/Exporting 

Configurations on page 4-41

.

Restart AP-51xx

Click the 

Restart 

access point

 

button to reboot the AP. Restarting 

the 

access point

 resets all data collection values to zero. Symbol 

does not recommend restarting the AP during significant system 
uptime or data collection activities.

CAUTION

After a reboot, static route entries disappear from the AP Route Table 
if a LAN Interface is set to DHCP Client. The entries can be retrieved 
(once the reboot is done) by performing an Apply operation from the 
WEB UI or a save operation from the CLI.

NOTE

The 

Apply

 button is not needed for restoring the access point default 

configuration or restarting the access point.

!

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов