Symbol AP-51xx Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 622

Symbol AP-51xx Скачать руководство пользователя страница 79

Getting Started

3-3

using the CLI to manage the access point, see

Appendix 8, Command Line Interface

Reference on page 8-1

.

•

Config file

- Readable text file; Importable/Exportable via FTP, TFTP and HTTP. Configuration

settings for an access point can be downloaded from the current configuration of another
access point meeting the import/export requirements. For information on importing or
exporting configuration files, see

Importing/Exporting Configurations on page 4-41

.

•

MIB (Management Information Base)

accessing the access point SNMP functions using a

MIB Browser. The access point download package contains the following 2 MIB files:

• Symbol-CC-WS2000-MIB-2.0 (standard Symbol MIB file)

• Symbol-AP-5131-MIB (can be used for both an AP-5131 and AP-5181 model access

point, an AP-5181 does not have its own MIB)

3.3 Default Configuration Changes for the Access Point

The following table illustrates the changes made to the access point default configuration.

NOTE

The AP-5181 model access point ships with the version 1.1.1 settings
described in the table below.

Version 1.0

Version 1.1

Version 1.1.1.0

WAN

DHCP client

Auto-Update Enabled

Static IP: 10.1.1.1

Static Mask: 255.0.0.0

Static IP: 10.1.1.1

Static Mask: 255.0.0.0

LAN 1

Static IP: 192.168.0.1

Static Mask: 255.255.255.0

DHCP Server Enabled

DHCP Client

Auto-Update Enabled

Default Gateway

Ethernet Port Enabled

DHCP Client

Auto-Update Enabled

Default Gateway

Ethernet Port Enabled

LAN 2

Not applicable in 1.0 release

Static IP: 192.168.1.1

Static Mask: 255.255.255.0

DHCP Server Enabled

Disabled

Access via

WAN port

HTTPS, SSH, SNMP:

Enabled

HTTP, HTTPS, SSH, SNMP,

Telnet: Enabled

HTTP, HTTPS, SSH, SNMP,

Telnet: Enabled

«
...
77
78
79
80
81
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов