manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 70 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 70

AP-51xx Access Point Product Reference Guide

2-26

7.

Cable the AP-5181 using either the AP-5181 Power Tap (Part No. AP-PSBIAS-5181-01R) or 
the Symbol Power Injector (Part No. AP-PSBIAS-1P2-AFR). 

 

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power 

Tap’s 

DATA IN

 connector or the Power Injector’s 

Data In

 connector.

b. Connect a RJ-45 Ethernet cable between the Power Tap’s 

DATA/PWR OUT

 connector 

or the Power Injector’s 

Data & Power Out 

connector and the AP-5181 LAN port.

c. For Power Tap installations, have a certified electrician open the Power Tap enclosure, 

feed the power cable through the unit’s 

LINE AC

 connector, secure the power cable to 

the unit’s three screw termination block and tighten the unit’s LINE AC clamp (by hand) 
to ensure the power cable cannot be pulled from the unit.

d. For Power Tap installations, attach a ground cable between the 

EARTH GROUND 

connector (on the back of the unit) to a suitable earth ground connection as defined by 
your local electrical code.

e. Ensure the cable length from the Ethernet source (host) to the Power Tap (or Power 

Injector) and AP-5181 does not exceed 100 meters (333 ft). Neither the Power Tap or 
Power injector has an On/Off power switch. Each receives power as soon as AC power 
is applied. For more information on using the see, 

Symbol Power Injector and Power Tap 

Systems on page 2-10

.

8.

Use the supplied cable connector to cover the AP-5181’s Console, LAN/PoE and WAN 
connectors.

9.

Once power has been applied, Verify the behavior of the AP-5181 LEDs. For more 
information, see 

AP-5181 LED Indicators on page 2-29

.

NOTE

The access point must be mounted with the RJ45 cable connectors 
oriented upwards to ensure proper operation.

CAUTION

Do not supply power to the AP-5181 Power Tap or Power Injector until 
the cabling of the access point is complete.

CAUTION

For Power Tap installations, an electrician is required to open the 
Power Tap unit, feed the power cable through the Line AC connector, 
secure the power cable to the unit’s three screw termination block and 
tighten the unit’s Line AC clamp (by hand) to ensure the power cable 
cannot be pulled from the Power Tap enclosure. Only a certified 
electrician should conduct the installation.

!

!

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов